Drivers For Systems

This page contains drivers for the systems, typically used if you install our hardware in your own PCs. Please make sure you have a proper understanding of installing hardware / software before you start installing your own systems. If you are in doubt about how to install these drivers, it is recommended that you order complete systems from HSAUSA.

Touch Panel driver
(8,948 kb ZIP file)

Touch panel driver, for newer Touch IPCs

Use this software to use the touch function on the TIPC. Includes calibration function.

TIPC motherboard driver
(9,966 kb ZIP file)

All the files needed to install the Touch IPC if you have a system delivered without Windows.

The steps to complete are, in this order (each step containing drivers in a separate directory) :
1) Setup the VIA4in1 chipset driver. Directory Via4in1
2) Setup the VGA driver. Directory Twister_XP2K_139362_Rotation_logod
3) Setup the sound driver (optional, not needed for printing)
4) Setup the touch driver. NOTICE: This is in a different download, below.

CB board driver
(370 kb ZIP file)

The CB board driver is needed to "talk to" the CB board once installed in a computer. You should install this driver after all the Windows system is working.

Simply unzip and run the setup file.

Drivers For Systems - downloads